Revision [753]
This is an old revision of DefaultPpj made by admin on 2008-04-14 14:35:32.
The Default Project (Default Project.ppj)
Any song placed in the PARIS application's home folder and named precisely "Default Project.ppj" is automatically loaded after the PARIS application is initialized. Taking advantage of this hard-coded behaviour is an excellent way to pre-load PARIS with your preferred work setup.
Before you proceed, note that the Default Project can become corrupted and cause serious, show-stopping issues with PARIS, so virtually all troubleshooting chains eventually reach the step of "remove your default project from the PARIS folder, and boot directly from the application". Note additionally that for multi-MEC systems your default project must be set to 48k; setting it to 44.1k will effectively disable multiple MEC rigs. If you have a multiple MEC rig, verifying this setting is an essential step in troubleshooting.
John Bercik walks us through the process of setting up your Default Project:
originally from JohnBercik John Bercik's PARIS Notes site; formatted and edited by KerryGalloway Kerry Galloway '08
- Make a template song with your favorite/most frequently used settings
- Save the project as "Default Project.ppj" in C:\Program Files\E-MU\PARIS Pro
Everytime you start a new project it will open; all of your settings will be there waiting for you. The same is true for effects selection, aux settings, windows preferences, etc.
John's settings as a suggested starting point:
In Editor Window
- Use Constrained Mode
- Enable Settings / "Show Object Names"
- Set "Now Line" to start at about the 30 second mark to allow for pre-roll automation.
- Set Zero Point at 30 sec.
- DISABLE "Show meters as Post Fader"
- DISABLE "Show Instrument Assignment"
- Set up commonly used Native / EDS effects so they are ready.
- Set up the EQ to "real world standards" on each channel, instead of the default 4bands of 1k.
- Suggestions by band: 1) 80Hz/rolloff 2) 650Hz/2.5Q sweep 3) 2k/2.5Q sweep, 4) 6k/rolloff.
- Set reverb on Aux 1
- Set delay on Aux 2
- Set headphone send as Aux 8
- Name effect returns after the submix number; all submixes are already created.
- Enable Automation
I have a drum mix that I love; since I rarely change the way I record the drums, I copy the mixer settings including, compression, eq and and so forth to my default project - JohnBercik John Bercik
