Revision history for DpProHall
Additions:
**Ref 1 - 2 Send:**
Deletions:
Additions:
**Ref 1 - 2 Level:**
**Ref 1 - 2 L/R:**
**Ref 1 - 2 L/R:**
Deletions:
**Ref1 - 2 L/R:**
Additions:
**Decay:**
Controls the amount of time for the reverb to decay
**Low Decay:**
Acts as a tone control and will boost (positive values) or cut (negative values) the rate at which low frequencies decay
**Damping:**
Controls the attenuation of high frequencies in the decay of the reverb
**High BW:**
A low-pass filter on the signal going into the reverb
**Diffuser 1:**
Smears the input signal transients
**Diffuser 2:**
Smears the input signal transients at lower frequencies than Diffuser 1
**Definition:**
Controls the rate at which echo density is increased with time
**Detune Rate:**
Controls the LFO rate of detuning introduced into the reverb decay
**Detune Depth:**
Controls the depth of the detuning
**Primary Send:**
Controls the level of the diffused input signal into reverb definition
**Ref1 - 2 Level:**
Controls the level of the first/second pre-echo
**Ref1 - 2 Send:**
Controls the level of the first/second pre-echo sent directly to the output
**Ref1 - 2 L/R:**
These four controls control the right and left delay time of the first and second pre-echoes
**Out Balance:**
Pans the reverb's output
**Predelay:**
Adjusts the time it takes for the original signal to reach the reverb
**Position 1 - 3:**
Controls the levels of a mic placed in front, in the middle, and at the rear of the hall.
Controls the amount of time for the reverb to decay
**Low Decay:**
Acts as a tone control and will boost (positive values) or cut (negative values) the rate at which low frequencies decay
**Damping:**
Controls the attenuation of high frequencies in the decay of the reverb
**High BW:**
A low-pass filter on the signal going into the reverb
**Diffuser 1:**
Smears the input signal transients
**Diffuser 2:**
Smears the input signal transients at lower frequencies than Diffuser 1
**Definition:**
Controls the rate at which echo density is increased with time
**Detune Rate:**
Controls the LFO rate of detuning introduced into the reverb decay
**Detune Depth:**
Controls the depth of the detuning
**Primary Send:**
Controls the level of the diffused input signal into reverb definition
**Ref1 - 2 Level:**
Controls the level of the first/second pre-echo
**Ref1 - 2 Send:**
Controls the level of the first/second pre-echo sent directly to the output
**Ref1 - 2 L/R:**
These four controls control the right and left delay time of the first and second pre-echoes
**Out Balance:**
Pans the reverb's output
**Predelay:**
Adjusts the time it takes for the original signal to reach the reverb
**Position 1 - 3:**
Controls the levels of a mic placed in front, in the middle, and at the rear of the hall.
Additions:
The DP/Pro Hall is a plugin created by [[MikeAudet Mike Audet]] for the PARIS EDS effects system.
