=====DP/Pro Hall===== The DP/Pro Hall is a plugin created by [[MikeAudet Mike Audet]] for the PARIS EDS effects system. According to Mike, //"This is the reverb I've been waiting for since the Skunkworks team began. It's smooth, wide, and you can run 4 of them on an EDS card. It is the best reverb I have ever worked with. You can check out a demo [[http://www.ensoniq.ca/dpprohall.mp3 here]]."// [[http://kerrygalloway.com/PARIS%20resources/installingpluginsandmore.pdf Installing the DP/Pro Hall]] (.pdf) {{image url="http://www.ensoniq.ca/dpprohall.jpg" title="DP/Pro Hall" alt="DP/Pro Hall"}} ====Controls explained:==== **Decay:** Controls the amount of time for the reverb to decay **Low Decay:** Acts as a tone control and will boost (positive values) or cut (negative values) the rate at which low frequencies decay **Damping:** Controls the attenuation of high frequencies in the decay of the reverb **High BW:** A low-pass filter on the signal going into the reverb **Diffuser 1:** Smears the input signal transients **Diffuser 2:** Smears the input signal transients at lower frequencies than Diffuser 1 **Definition:** Controls the rate at which echo density is increased with time **Detune Rate:** Controls the LFO rate of detuning introduced into the reverb decay **Detune Depth:** Controls the depth of the detuning **Primary Send:** Controls the level of the diffused input signal into reverb definition **Ref 1 - 2 Level:** Controls the level of the first/second pre-echo **Ref 1 - 2 Send:** Controls the level of the first/second pre-echo sent directly to the output **Ref 1 - 2 L/R:** These four controls control the right and left delay time of the first and second pre-echoes **Out Balance:** Pans the reverb's output **Predelay:** Adjusts the time it takes for the original signal to reach the reverb **Position 1 - 3:** Controls the levels of a mic placed in front, in the middle, and at the rear of the hall. ---- **Bugs/peculiarities:** ---- **Suggested Applications and Settings:**