=====Signal Flow Through PARIS Mixer including Auxes and Master/Global sections.===== Manual (see below for Edmund's ASCII correction) {{image url="http://www.svn.net/artguy/paris.notes/Paris-Mixer-Signal-Flow.jpg" title="Mixer Signal Flow" alt="Mixer signal flow"}} =====Signal flow through an individual mixer strip.===== {{image url="http://www.svn.net/artguy/paris.notes/Paris-Signal-Flow.jpg" title"="Signal Flow" alt="Signal Flow"}} Ok, I'll tell you this: native inserts come BEFORE the EDS inserts, below is the corrected flow diagram: > > > ============================================ > PLAYBACK > ============================================ > > > WAVE READ FROM DISK > | > NATIVE INSERTS (top to bottom) > | > EDS INSERTS (top to bottom) > | > TRIM > | > EQ MODULE > | > PHASE switch > | > LEVEL METER/CLIP INDICATOR (if show meters as post is unchecked) > | > AUX TAP POINT (PRE) > | > FADER > | > MUTE BUTTON > | > LEVEL METER/CLIP INDICATOR (if show meters as post is checked) > | > AUX TAP POINT (P/P) > | > PAN > | > AUX TAP POINT (POST) > | > ------------------ > | | > | SOLO > | | > ST. SUBMIX BUS MONITOR BUS This is pretty close, but no warranties are made. Trim and EQ are done in one step (so the separation above is not quite correct). ------------------------ Edmund Pirali Intelligent Devices, Inc.